New Video on 7 Steps of Hand Caning

Check out our first in a series of videos available on our website. We start out with the 7 steps of hand caning - the old fashioned way. Other videos coming are no knot method,the rush on chairs and frames, pressed cane - taking the old out and putting the new in...stay tuned. Check it out here:
http://peerlessrattan.com/video-instructions-for-seat-weaving.html

Making Splint Chairs from Scratch

John Berkshire makes furniture down in Central Arkansas. He enjoys making ladder-back style chairs in the old time fashion - splitting and riving parts from oak logs, then shaping the parts using a draw-knife, spokeshave, and lathe, then steam bending and assembling all the parts using wet dry joinery and other traditional methods. Pictured is his first painted and woven splint piece. It's black milk paint over red. This is a prototype he built from a white oak log he bought from a sawmill up in the Ozarks. John says they're awfully fun to make. He loves this splint woven seat. He's looking forward to doing more. Isn't it amazing? Beautiful job John!

Round Hand Cane Seats

One of the most asked questions for new caners is "what hole should I use in a round or non-square seat?" We had a set of chairs where each one of our caners took one, and each one was done a little differently...they all had the same final look where they had "x's" on each side, and yet they all used a different hole along the sides, front and back. I always lay a piece of cane from front to back or side to side and "guess" which hole is even with the rest of the horizontals or verticals in the chairs. You will always have to skip holes, and double up on holes in each corner...sometimes two or three times in each. The more chairs you do, the better you will get at knowing which hole to put the cane. Below are several photos to show the skipping and doubling up of holes along the sides.

Notice how holes were skipped Notice how we doubled up strands in the corners

Notice the "x's" along the front, back and sides