Rush Frame with no corners - special weave

There are many different specialty weaves for rush and in the next month or two we will be describing a few of them.  This one is a frame with what we say has no corners.  Before you attempt any type of seat like this...examine it and take pictures as you remove the rush.  It is good sometimes if there are two chairs so you can refer to the other one as an example.  Click on to these video instructions if you would like to attempt this special rush weave.

Splint Seats

Click here to view our video on how to use splint or flat reed in a chair.   

Some of the tips for flat reed:

• Don't use hot water or soak the material too long as it will cause the hair to stick up on the reed
• Make sure you tighten up each strand as you will end up running out of space in the front.
• You can stain the seat by using most stains.  Just know that if you stain the seat after you put it in, and use it, there will be marks where the natural material will show through.  You can avoid this by either staining the strips before you put them in or use smoked reed which appears to be stained.  You can purchase smoked reed from Peerless Rattan.

How to Replace a Pressed in Cane Seat

 Here is a link to our latest video on Pressed in Cane Seats.  

More tips about removing hard to handle spline:

• Use vinegar in the groove to soften the spline
• Drill small holes into the spline to break it up
• A good spline chisel and razor knife.

Use a water soluble type glue - Hide Glue or Elmer's...using anything else will make it very difficult for the next person removing the spline - and that person could be you!